BE SAFE! Compared to a typical automobile, motorcycle brake lights are simply too small to attract immediate attention. This is especially true for the cruisers because they are mounted so low to the ground. TailBlazer overcomes this by rapidly flashing the tail lights the instant you apply the brakes. The flash rate then slows down to a steady ON - this cycle lasts about four (4) seconds. This flash pattern is called a Deceleration Warning. The Motorcycle Safety Foundation (MSF) suggests that you pump your brakes at each stop. TailBlazer does it automatically, and by flashing both filaments for a maximum brightness. TailBlazer 20W-D SELF MODULATING HALOGEN bulb has a dual contact base. The Modulator is built directly into the base while the element is replaceable. What do they see? As soon as you tap your brakes, drivers behind you will see the brake light(s) modulate rapidly at first then slow down to a solid ON over a period of four (4) seconds.This sudden flashing invokes immediate attention. What will they think? TailBlazer uses a flash pattern which decays exponentially - a well-recognized deceleration warning. The attention to the initial flashing now changes to a clear recognition that you're beginning to slow down! Simply flashing brake lights or flashing them on & off will get the attention of drivers behind you, but it doesn't invoke anything else. Every split second of delay in their reaction reduces your safety margin. The internal circuitry is controlled by a microprocessor. The trigger voltage to begin the deceleration flash pattern when the brakes are applied is set at 12.1V min. Therefore you may need to have the engine running for brake flash to occur reliably. Deceleration flash pattern for the brakes will always be at full intensity. Simply hold the brakes and then turn the ignition on three times quickly. There are two selectable intensities High and Low. more info

Custom Motorcycle LED Rear Tail Light

ALL-IN-ONE Integrated Taillight with Plate Holder

INCREASE SAFTEY - Ultra Bright LED Brake Lights. Visible By All Traffic.

ALL LED INTEGRATED TAILLIGHT

1. Running Lights (red)

2. Brake Lights (red)

3. Turn Signals (amber)

4. License Plate Light (white)

100,000+ Hour Lifespan

E-MARKED

Universal Custom Fit

NEW! Fender Eliminator with integrated rear lights

Fitment:

This is a custom product that will fit on all applications

more info

Specifications:

Enhance the look with these EURO
Clear LED Tail Light
Stop and tail light (ie leds get brighter when brakes applied)
Direct bolt on; Easy installation, no modification required
Condition: Brand New
Quantity: 1
Lense Color: Clear
Get lit up and add some extra va va voom to the rear of your bike with this tail light that has red LED's and a reflective casing which really makes the most of the light provided.

This light is a universal fit and has been manufactured for use with the majority of bikes on the market - please see the diagram for fixing dimensions

Fitment:

This is a custom product that will fit on all applications
Cruisers, Harleys, Choppers
Honda (All Models & Years)
Kawasaki (All Models & Years)
Suzuki (All Models & Years)
Yamaha (All Models & Years)
Scooters (All Makes & Models)
ATV's, Snowmobiles more info